
Lead Optical Engineer – Space Spectrometers
Berlin, DE · Full-timePosted 3 days agoTech & Engineering
You will own AIRMO's imaging spectrometers, from the first Zemax model through EM and FM integration, test and calibration to flight. You will also build the optics capability around them: the team, the lab and the supplier base.
The instrument you will start on: SWIR push-broom imaging spectrometer for methane
This is a lead role in a small team: you set the optical architecture and you also sit at the bench and align it. You report to the CTO.
What you will do
Apply with your CV and a short note on the spectrometer you are proudest of.
The instrument you will start on: SWIR push-broom imaging spectrometer for methane
This is a lead role in a small team: you set the optical architecture and you also sit at the bench and align it. You report to the CTO.
What you will do
- Design spectrometer optics in Zemax: telescope, slit, collimator, grating or prism, imager. Own the performance budgets: MTF, keystone and smile, spectral response, SNR, stray light.
- Run tolerancing and STOP analyses with our mechanical and thermal engineers, and drive the design to an alignment concept that can actually be built.
- Specify optical components (gratings, mirrors, lenses, filters, coatings), select suppliers, follow manufacturing and run incoming inspection.
- Lead integration, alignment and test hands-on: interferometry, autocollimation, focus and boresight, TVAC and vibration campaigns.
- Define and run spectral, radiometric and geometric calibration, from the lab through in-orbit commissioning.
- Write and defend the optical design and verification documents at PDR, CDR and test reviews, for customers and partners.
- Hire and mentor optical engineers, and set up the optics lab and its test equipment.
- Be the technical counterpart for optics partners and contribute to proposals and cost estimates for new instruments.
Apply with your CV and a short note on the spectrometer you are proudest of.
Your profile
Technical Requirements- 10+ years in optical engineering, most of it on space or airborne instruments.
- You have personally designed at least one grating or prism spectrometer in Zemax OpticStudio or Code V that reached qualification or flight hardware. Tell us which one and what you did on it.
- Hands-on AIT experience on space optics: you have aligned, tested and calibrated flight or flight-representative hardware yourself, not only specified or reviewed it.
- Experience across a full instrument lifecycle.
- A track record of specifying optical components and managing optical suppliers and manufacturers.
- Practical knowledge of the space environment for optics: radiation-tolerant materials and coatings, adhesive-free mounting, contamination control and outgassing, thermal stability.
- Stray-light analysis and STOP analysis, in Zemax non-sequential mode or equivalent tools.
- SWIR or greenhouse-gas spectrometers (methane, CO2) and their calibration.
- Narrowband interference filters and lidar receivers.
- SWIR detectors (InGaAs) and their optical interfaces.
- Scripting for analysis and automation: Python, Matlab or Zemax ZPL.
- Experience leading or building an optics team.
- Interest in NewSpace and climate.
Why us?
- Ownership of a flight spectrometer and the optics roadmap behind it, with a direct line to the founders.
- A role you can shape: full-time, part-time from 3 days a week, or long-term freelance.
- Based in Berlin or Munich, remote-first, on site for design reviews and AIT campaigns.
- Work that cuts methane emissions, one of the fastest levers against climate change.
Apply at Airmo
This role is listed because Airmo is part of the Ignite Next portfolio. Applications are handled by Airmo directly — Ignite Next does not receive your application, screen candidates or act as a recruiter.
Similar roles in the portfolio
Elektriker (m/w/d)
BlackSemiconductor · Aachen, DE · Remote · Full-time · Posted 9 days ago
Tech & EngineeringApply
Principal Facilities Engineer (f/m/d)
BlackSemiconductor · Aachen, DE · Onsite · Full-time · Posted 18 days ago
Tech & EngineeringApply
Technical Project Manager Bergen
Lace Lithography · Blomsterdalen, NO · Full-time · Posted 21 Oct 2026
Tech & EngineeringApply
SAP S/4Hana Key User / Fachbereichskoordinator
BlackSemiconductor · Aachen, DE · Remote · Full-time · Posted 12 Oct 2026
Tech & EngineeringApply
SAP S/4HANA Key User / Fachbereichskoordinator
BlackSemiconductor · Aachen, DE · Remote · Full-time · Posted 12 Oct 2026
Tech & EngineeringApply
Head of Quality
Lace Lithography · Blomsterdalen, NO · Full-time · Posted 12 days ago
Tech & EngineeringApply
